Resmed Airfit F30I SYS - APAC Full Face Mask (63340) (M) 1's

MRP ₹5,996.25 (Inclusive of all taxes)
New Reduced MRP as per revised GST benefit.
Deliver to

    Netmeds First Membership

    Starting at just ₹[] for 3 months.
    View Plans

    Description

    The Resmed AirFit F30i is a minimal-contact full face mask intended for individuals prescribed non-invasive PAP therapy, such as CPAP or bi-level treatment. It is designed to provide a clear field of vision and freedom of movement, addressing common issues like tubing getting in the way. The mask features an under-the-nose cushion to reduce discomfort and red marks on the nasal bridge, a common complaint with traditional masks. Its top-of-the-head tube connection allows users to sleep in various positions comfortably.

    Top-of-Head Tube Connection: Keeps tubing out of your way, allowing for freedom to move and sleep in any position.
    Under-the-Nose Cushion: The UltraCompact cushion sits comfortably under the nose, helping to prevent irritation and red marks on the nasal bridge.
    Clear Field of Vision: The minimal design allows users to wear glasses, read, or watch television before bed without obstruction.
    Quick-Release Elbow: A 360-degree swivel elbow allows you to easily disconnect and reconnect from the tubing without taking off the entire mask.
    Magnetic Clips: Two simple magnetic clips make putting the mask on and taking it off straightforward and convenient.

    Q: What is the primary benefit of the AirFit F30i's design?
    A: The mask features a top-of-the-head tube connection and a minimal-contact cushion that rests under the nose. This design allows for greater freedom of movement, enabling users to sleep in various positions without the tubing getting in the way.

    Q: Is this mask suitable for individuals who breathe through their mouth?
    A: Yes, the AirFit F30i is a full-face mask that covers the mouth and seals under the nose, making it suitable for mouth breathers undergoing CPAP or BiPAP therapy.

    Q: Can I wear glasses with the AirFit F30i mask?
    A: Yes, the under-the-nose cushion design eliminates pressure on the nasal bridge and provides an open line of sight, allowing you to comfortably wear glasses to read or watch television before sleep.

    Q: How should the AirFit F30i mask be cleaned?
    A: For daily cleaning, the cushion, frame, and elbow should be washed with a mild liquid detergent and left to air dry. The headgear should be washed weekly in a similar manner. Always consult the user guide for detailed instructions.

    Q: Who should consider using the AirFit F30i mask?
    A: This mask is intended for patients weighing more than 30 kg who are prescribed non-invasive PAP therapy. It is a good option for active sleepers, side sleepers, and those who experience claustrophobia with more traditional full-face masks.

    The Resmed AirFit F30i is a minimal-contact full face mask intended for individuals prescribed non-invasive PAP therapy, such as CPAP or bi-level treatment. It is designed to provide a clear field of ...Read More

    Key Benefits

    Allows for freedom of movement during sleep with its top-of-head tube connection and 360-degree swivel.
    Reduces facial marks and irritation on the nasal bridge thanks to the under-the-nose cushion design.
    Provides an open line of sight, enabling users to wear glasses or read comfortably before sleeping.
    Features a quiet venting technology that disperses air gently to minimize noise for the user and their bed partner.
    Designed for simple use with magnetic clips and a quick-release elbow for easy application and removal.

    Allows for freedom of movement during sleep with its top-of-head tube connection and 360-degree swivel.
    Reduces facial marks and irritation on the nasal bridge thanks to the under-the-nose cushion ...
    Read More

    Direction for Use/Dosage

    Before first use, remove all packaging and inspect each component for any visible deterioration.
    To fit the mask, first detach the magnetic clips. Place the cushion under your nose so it sits comfortably against your face.
    Pull the headgear over your head, ensuring the ResMed logo is facing up.
    Bring the lower headgear straps below your ears and attach the magnetic clips to the frame.
    Adjust the upper and lower straps evenly until the mask is sealed and comfortable, but do not overtighten.
    Connect the air tubing from your device to the elbow at the top of the mask frame.
    For daily cleaning, disassemble the mask and hand wash the cushion, frame, and elbow in warm water with a mild detergent, then allow to air dry out of direct sunlight.

    Before first use, remove all packaging and inspect each component for any visible deterioration.
    To fit the mask, first detach the magnetic clips. Place the cushion under your nose so it sits comfo...
    Read More

    Safety Information/Precaution

    It is advisable to consult with a healthcare professional before using this product, especially if you have pre-existing medical conditions.
    The use of masks with magnetic components is contraindicated for individuals with a metallic hemostatic clip implanted in the head or metallic splinters in one or both eyes.
    Do not overtighten the headgear, as this may lead to skin redness or sores around the mask cushion.
    Always follow the provided cleaning instructions. Do not use harsh cleaning products, a dishwasher, or a washing machine to clean the mask.
    If any component of the mask shows visible signs of deterioration such as cracking or tears, it should be discarded and replaced.
    Some rebreathing may occur at low CPAP pressures.
    If you experience tooth, gum, or jaw soreness, consult your physician or dentist.

    It is advisable to consult with a healthcare professional before using this product, especially if you have pre-existing medical conditions.
    The use of masks with magnetic components is contraindic...
    Read More

    Other Information

    This product is intended for single-patient reuse in a home environment or multi-patient reuse in a hospital setting (when reprocessed according to instructions). The mask is designed for patients weighing more than 30 kg (66 lb). The cushion is made from a soft, hypoallergenic silicone material. For storage, ensure the mask is clean and dry and keep it in a dry place away from direct sunlight. This product may be disposed of with normal household refuse as it does not contain hazardous substances.

    This product is intended for single-patient reuse in a home environment or multi-patient reuse in a hospital setting (when reprocessed according to instructions). The mask is designed for patients wei... Read More

    Lab updated